This is my attempt at creating an open source controller for the LitterRobot3, a very expensive but incredibly useful addition to my house with 3 cats. Or at least it was very useful when it was working. It has been acting up for a while, and I’m not entirely sure what the problem is yet. […]
Continuing from the “Getting Started” post that didn’t really get to anything exciting, we’re going to play with the REPL and blink a light! Getting to the REPL On linux, you can install a program called Picocom that will get you the REPL over the serial port. sudo apt-get install picocom To use it call […]
Looking to use some of these little boards within my home automation system running on Home Assistant. I’ll have some more posts on that later as I upgrade my current setup from 0.39.0 to something more recent (0.58.1 ATM). I’ll be doing most of these from my Linux laptop, but occasionally I might work from […]